Aftermarket cold air intakes are one of the best performance upgrades you can make to your car. Not only do they increase horsepower and torque, but they also help to cool down the engine. They’re easy to install, but how much do these cost? after doing some research I am going to share the overall cost to install a cold air intake on your vehicle, read on.
What is a Cold Air Intake?
A cold air intake is a device that is installed on the air intake system of your car. The purpose of this device is to bring in more air into your engine and let it mix with fuel for combustion. The process of burning fuel creates heat, which can damage your engine if it’s not properly cooled.
The main benefit of a cold air intake is that it cools the incoming air before it enters your engine. This can increase horsepower and improve fuel economy.
Some cold air intakes systems have additional components that boost their performance. For example, some models include an extra heat shield to help keep hot engine parts away from the filter. Others have tubes that direct cooler air directly into the throttle body or other parts of the intake system. There are also kits available that replace your stock intake system entirely with a cold air kit, eliminating any possibility of overheating issues or decreased efficiency.
How Much Does it Cost to Install a Cold Air Intake?
The price of cold air intake systems can range from as little as $60 to more than $1000, depending on the type of vehicle and system you choose.
The higher-end systems usually use a larger cone filter which will require more material and labor to install properly. generally, Cold air intakes are easier to install since they only require a few simple tools and a little bit of know-how. If you’re not comfortable doing it yourself, however, you can probably find an independent mechanic who will install the cold air intake system for around $50-$200.
How Long Does it take to Install a Cold Air Intake?
According to pickuptrucks.com installing a cold air intake is relatively easy and can take 30 minutes if you are handy. If you’re not handy, it will probably take about an hour or two. It’s important to note that you’ll need some tools before you start the installation process. I would recommend that you take your car to a mechanic if you’re not comfortable installing the cold air intake yourself. You can find an independent mechanic for around $50-$200.
Is installing a cold air intake worth it?
The short answer is yes. Cold air intakes are a great way to increase power for a car, and you can get them for pretty much any car. They’re especially useful in trucks and SUVs, but they can also be used in cars to increase performance. The downside for this is because this is an aftermarket performance upgrade it will likely void the warranty on your car. If you’re looking to increase the performance of your vehicle, then it’s definitely worth it to install a cold air intake kit.
What are the cons of a cold air intake?
Can Get Pricey
Cold air intakes can be expensive, especially if you have an exotic car with complicated engine cooling systems that need to be modified for proper fitment. And since these systems are typically custom-made for each application, they tend to be even more expensive than stock replacement parts.
Can void the warranty
Some manufacturers don’t allow modifications like cold air intakes on their cars at all, so if you go this route make sure you check with your dealer first before installing anything new on your ride! So If your vehicle has a warranty and you install a cold air intake system on it, there’s no guarantee that the manufacturer won’t void the warranty if something breaks down due to the modification that was made to your car’s engine compartment
cold air intakes are a great way to improve your performance and get more power out of your engine. They’re also very easy to install, especially if you’re using an intake kit. If you want to install one on your vehicle all by yourself, it shouldn’t take more than an hour or so if you have all the necessary tools in hand and some experience, the cost is $60 to more than $1000, and it good ones will cost $300.
Robert Anderson is a world class motorhead who rebuilt his first carb at age 10, his first engine at age 15, and completed his first full hotrod build when he was just 18! Previously, he has ran a part warehouse, delivered pizzas, and managed the service department for a $20 million/year revenue dealership. Robert knows cars like few others and he is passionate about sharing his knowledge.